최신e20-501덤프를 제공합니다.

안녕하세요.바쁜시간에 시험까지 보느라고 여러분 수고가  이만저만이 아니겟어요.쉽게 인증을 통과해볼 생각은 없나요.오늘은 최신의 정보 E20-815를 소개드립니다.100%으 통과률을 약속합니다.만약에 우리시험문제를 구매하고 처음으로 시험을 통과하지 못하면 PROMETRIC 나 VUE 시험 센터에서 도장을 찍은 성적표로 우리들의 시험 문제를 구매했던 금액을 전액 환불해 줄 것입니다. 고객에게 아무런 손해를 보지 않도록 할것입니다. Killtest 인증시험문제를 구매한 고객분들은 일년 동안 무료로 업그레이드서비스를 받을수도 있습니다.

시험번호: E20-815

시험문제:

1. A company has many low end servers that need to access SAN attached storage. The company does
not want to invest any additional money in the servers to make this happen. Each server will have one
NIC card that will be used for iSCSI. The customer wants as high availability as possible. Their current
SAN infrastructure consists of all MDS directors, with multiple FC and IP cards in each. What feature can
be used to make their environment as fault tolerant as possible?
A. VRRP
B. Host based multipathing
C. Ethernet adapter teaming
D. Zone with SANvergence Manager
Answer: A
2. The customer manages their SAN environment with ControlCenter. They have installed FCC Agent on
Host A and Host B. They have installed the NAS Agent on Host B. Host A was down for one day, during
which they lost NAS monitoring and switch management. Why did this happen?
A. SNMP traps on both agents are set to READ/ ONLY
B. Both Agents are communicating over the same SNMP Port
C. SNMP traps on both agents are set to the wrong IP Address
D. FCC Agent does not initiate a fail over to the Host B, and NAS Agent was inactive
Answer: B
3. A company wants the most cost effective way to add 100 new hosts. Each host requires
approximately 15MBps. All servers must be dual attached. They currently have all MDS 9509 directors,
and could add line cards at your recommendation. What solution should you recommend?
A. Add 2 IP cards with 4 ports each and use iSCSI to connect into the SAN
B. Add 2 IP cards with 8 ports each and use iSCSI to connect into the SAN
C. Add 2 fiber channel cards with 32 ports each and fiber attach all the hosts
D. Add 8 fiber channel cards with 32 ports each and fiber attach all the hosts
Answer: B
4. A customer has deployed two separate data centers located 100 km apart. Each site has two MDS
9509 configured with 2 VSANs in each director. The directors have IPS modules with FCIP configured
between the MDS directors using their existing IP network between sites. NO EISLs currently exist. They
want to implement a backup solution where all backups are done to CDL units located at the remote data
center location.
What is the best solution for this requirement?
A. Configure EISL between locations and create a new tape VSAN containing CDL ports and all host
ports
B. Configure new EISLs between locations, merge ALL existing fabrics between sites and connect CDL
ports to new fabrics
C. Create a new tape VSAN at each location containing CDL ports and implement IVR for host access to
tape resources at the remote location
D. Configure EISL between locations and create a new tape VSAN containing all CDL ports and
implement IVR for backup hosts to access tape resources at local the location
Answer: C
5. Port Security is enabled at the customer site on all ports of the MDS-series switch. Which statement is
true?
A. All intrusion attempts are reported when accessing switches in a fabric using FTP
B. Login requests via Telnet are restricted from unauthorized Fibre Channel devices accessed in a fabric
C. Login requests from unauthorized Fibre Channel devices (Nx ports) and switches (xE ports) are
rejected
D. Login requests from unauthorized users to the fabric are rejected from the network security
management in the switch
Answer: C

매달에 제시간 업데이트 할테니까 걱정하지 마세요!

저희회사의 홈페이지 바로가기:www.killtest.kr