안녕하세요.인증시험을 치를때마다 자꾸 않타까운 분들이 계십니다.일 때문에 공부할 시간이 없거나 훌륭한 학습내용을 얻지 못했다든가 등등 원인으로 말입니다.효율적인 덤프하나로 확실하게 한번 화끈하게 통과할 생각은 해보셨나요?지지끌끌한 엉뚱한 재료 외우느라 밤새지 말고 killtest덤프 한번 사용해 보시죠.1월6일에 업데이트 된 이 덤프는 최신으로 된 덤프로서 그대의 인증시험을 도와 그대로 통과시킬 것입니다.주저마시고 한번만 써보십시오.실망시키지 않을 자신 있습니다
시험번호: E20-616
Q&A: 123 Q&As
가격(달러): $ 139.00 $ 119.00 USD
1. When is the relationship between a data volume and a BCV created?
A. When the BCV is created in the bin file
B. When the BCV is established
C. When the BCV is split
D. When the BCV is varied on
Answer: B
2. A DMX-2 memory configuration containing four (4) memory boards is to be upgraded to larger size
cache boards. The upgrade results in a two (2) memory board configuration. How will the bandwidth of
the DMX-2 be affected by the upgrade?
A. Decreased by the smaller cache card count
B. Increased by the larger memory size
C. Unchanged, only memory size is affected
D. Will remain at the theoretical maximum
Answer: B
3. What is a major difference in director data flow between the Symmetrix 8000 series and a DMX-2?
A. An 8430 uses loop redundancy
B. An 8530's directors are connected to two data busses
C. Directors in a DMX-2 are connected to top high and bottom low
D. DMX-2 port bypass cards are connected directly to cache
Answer: B
4. What is a difference between a Symmetrix 8830 and a DMX-2?
A. An 8830 24-slot card cage is scalable
B. Disks on a DMX-2 are FC-AL
C. DMX-2 uses a cache interconnect multi-drop bus
D. Maximum system bandwidth on an 8830 is 16Gb/s
Answer: B
5. When will a customer's host be able to access the data on a BCV?
A. After the BCV is established
B. After the BCV is split
C. When the BCV is created in the Bin
D. While the BCV is syncing with the data volume
Answer: B
저희회사의 홈페이지 바로가기:www.killtest.kr