F5 BIG-IP V9.4 LTM Essentials F50-521 시험문제는IT 인증강사 및 제품 전문가가 시험문제를 완벽하게 만들었습니다. 최근 출제되었던 시험문제에서 F50-521가 모든 문제와 정답을 맞추었습니다.Killtest 인증시험문제를 구매한 고객분들은 일년 동안 무료로 업그레이드 서비스를 받을 수 있습니다. /F5-Networks-Certifications/F50-521.asp 시험문제는 고객님이 한번에 인증시험을 통과할 수 있는 것을 도와 줄 것입니다. 떨어지는 경우 전액 환불을 약속합니다.
VUE/Prometric Code:F50-521
Exam: F5 BIG-IP V9.4 LTM Essentials
Ver:V8.02
Q&A:100 Q&As
업그레이트:2010-06-28
Q&A:100 Q&As
업그레이트:2010-06-28
일부시험문제보기:
16: If a client's browser does not accept cookies, what occurs when the client connects to a virtual server
using cookie persistence?
A.The connection request is not processed.
B.The connection request is sent to an apology server.
C.The connection request is load-balanced to an available pool member.
D.The connection request is refused and the client is sent a "server not available" message.
Answer: C
17: Assuming other fail-over settings are at their default state, what would occur if the fail-over cable were
to be disconnected for five seconds and then reconnected?
A.As long as network communication is not lost, no change will occur.
B.Nothing. Fail-over due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
C.When the cable is disconnected, both systems will become active. When the voltage is restored, unit
two will revert to standby mode.
D.When the cable is disconnected, both systems will become active. When the voltage is restored, both
systems will maintain active mode.
Answer: C
18: Assuming there are open connections through an active system's virtual servers and a fail-over
occurs, by default, what happens to the connections?
A.All open connections are lost.
B.All open connections are maintained.
C.When persistence mirroring is enabled, open connections are maintained even if a fail-over occurs.
D.Long-lived connections such as Telnet and FTP are maintained, but short-lived connections such as
HTTP are lost.
E.All open connections are lost, but new connections are initiated by the newly active BIG-IP, resulting in
minimal client downtime.
Answer: A
19: Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?
A.The SNAT must be enabled for all VLANs.
B.The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.
C.The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.
D.The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.
Answer: C
using cookie persistence?
A.The connection request is not processed.
B.The connection request is sent to an apology server.
C.The connection request is load-balanced to an available pool member.
D.The connection request is refused and the client is sent a "server not available" message.
Answer: C
17: Assuming other fail-over settings are at their default state, what would occur if the fail-over cable were
to be disconnected for five seconds and then reconnected?
A.As long as network communication is not lost, no change will occur.
B.Nothing. Fail-over due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
C.When the cable is disconnected, both systems will become active. When the voltage is restored, unit
two will revert to standby mode.
D.When the cable is disconnected, both systems will become active. When the voltage is restored, both
systems will maintain active mode.
Answer: C
18: Assuming there are open connections through an active system's virtual servers and a fail-over
occurs, by default, what happens to the connections?
A.All open connections are lost.
B.All open connections are maintained.
C.When persistence mirroring is enabled, open connections are maintained even if a fail-over occurs.
D.Long-lived connections such as Telnet and FTP are maintained, but short-lived connections such as
HTTP are lost.
E.All open connections are lost, but new connections are initiated by the newly active BIG-IP, resulting in
minimal client downtime.
Answer: A
19: Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?
A.The SNAT must be enabled for all VLANs.
B.The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.
C.The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.
D.The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.
Answer: C
F50-521덤프다운로드바로가기: http://www.killtest.kr/F5-Networks-Certifications/F50-521.asp