VUE/Prometric Code: EW0-200
Exam: Extreme networks associate(ena)
Ver:V3.31
Q&A:240 Q&As
Q&A:240 Q&As
업그레이트:2010-06-28
ExtremeNetworksCertifications EW0-200 문제는 시험문제의 변화에 따라 업데이트가 될것입니다.시험문제가 매번 바뀐 후, 2일내에 시험문제 EW0-200 를 수정하여 다시 조정함으로서EW0-200 :Extreme networks associate(ena)가 시험문제의 점유률을 항상 96% 이상으로 확보합니다.
일부시험문제먼저보기:
10. Which CLI command will you use to change the CLI prompt from the default display to Switch02?
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B
11. In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B
11. In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer:A
12. In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A
13. A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B
14. Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C
15. What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B
Answer:A
12. In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A
13. A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B
14. Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C
15. What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B